Volume 13, Issue 2 (June 2026)
J. Food Qual. Hazards Control 2026, 13(2): 89-100 |
Back to browse issues page
Ethics code: Not applicable.
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Adimah, Purnomo E, Saraswati, Armetha V. Effect of Retort Pressure on Sterilization of Rembiga Satay in Flexible Packaging Using Overpressure Retorts. J. Food Qual. Hazards Control 2026; 13 (2) :89-100
URL: http://jfqhc.ssu.ac.ir/article-1-1363-en.html
URL: http://jfqhc.ssu.ac.ir/article-1-1363-en.html
Department of Food Science and Technology, Faculty of Agricultural Technology, IPB University, Bogor, Indonesia
Abstract: (176 Views)
Background: Flexible packaging, such as retort pouches, is widely used for sterilized food products, since it can preserve product quality and improve distribution efficiency. However, flexible packaging is susceptible to deformation and leakage during thermal processing. This study aimed to evaluate the effects of retort pressure and packaging type on heat penetration characteristics, process lethality (F0), packaging integrity, and physicochemical properties of Rembiga satay processed using an overpressure retort.
Methods: The study consisted of four stages: heat distribution testing, preparation of Rembiga satay, heat penetration testing, and physicochemical analysis. Rembiga satay was packaged in aluminum and plastic retort pouches and sterilized at 116 °C using different retort pressures. Process optimization was performed using the Ball method. Data were analyzed using analysis of variance (ANOVA) followed by Duncan’s multiple range test at a 95% confidence level using SPSS software.
Result: Heat distribution testing produced Come Up Time (CUT) values of 21 min for aluminum packaging and 23 min for plastic packaging. Initial heat penetration trials resulted in F0 values ranging from 1.06 to 3.66 min, indicating insufficient lethality in several treatments. After process redesign using the Ball method, estimated F0 values increased to 3.28 min for aluminum packaging and 6.55 min for plastic packaging. The highest tensile strength of the sealing area was observed in aluminum retort pouches processed at 0.8 bar, with a value of 19.4 N/mm². Sterilization also significantly affected the physicochemical properties of Rembiga satay, including texture profile parameters, color values, and proximate composition.
Conclusion: Retort pressure and packaging type significantly affected packaging integrity and thermal processing characteristics of Rembiga satay. Although several initial sterilization treatments resulted in insufficient F0 values, process redesign using the Ball method successfully achieved F0 values exceeding the minimum commercial sterility requirement.
DOI: 10.18502/jfqhc.13.2.22138
Methods: The study consisted of four stages: heat distribution testing, preparation of Rembiga satay, heat penetration testing, and physicochemical analysis. Rembiga satay was packaged in aluminum and plastic retort pouches and sterilized at 116 °C using different retort pressures. Process optimization was performed using the Ball method. Data were analyzed using analysis of variance (ANOVA) followed by Duncan’s multiple range test at a 95% confidence level using SPSS software.
Result: Heat distribution testing produced Come Up Time (CUT) values of 21 min for aluminum packaging and 23 min for plastic packaging. Initial heat penetration trials resulted in F0 values ranging from 1.06 to 3.66 min, indicating insufficient lethality in several treatments. After process redesign using the Ball method, estimated F0 values increased to 3.28 min for aluminum packaging and 6.55 min for plastic packaging. The highest tensile strength of the sealing area was observed in aluminum retort pouches processed at 0.8 bar, with a value of 19.4 N/mm². Sterilization also significantly affected the physicochemical properties of Rembiga satay, including texture profile parameters, color values, and proximate composition.
Conclusion: Retort pressure and packaging type significantly affected packaging integrity and thermal processing characteristics of Rembiga satay. Although several initial sterilization treatments resulted in insufficient F0 values, process redesign using the Ball method successfully achieved F0 values exceeding the minimum commercial sterility requirement.
DOI: 10.18502/jfqhc.13.2.22138
Type of Study: Original article |
Subject:
Special
Received: 25/05/02 | Accepted: 26/06/26 | Published: 26/07/01
Received: 25/05/02 | Accepted: 26/06/26 | Published: 26/07/01
References
1. AOAC (2012) Official Method of Analysis of The Association of Official Analytical of Chemist. 19th edn. Washington DC: AOAC International.
2. Ariyana, M.D., Handayani, B.R., Amaro, M., Rahayu, T.I., Afriliya, N.S., Widyastuti, S., Nazaruddin, Perdhana, F.F., Sinaga, Y.M.R. and Nurhikmat, A. (2023) 'Sensory quality of Rembiga satay in a retort pouch packaging with different sterilization time', in 7th International Conference on Food, Agriculture, and Natural Resources (IC-FANRES 2022), pp. 379-387. Available at: [DOI:10.2991/978-94-6463-274-3_35]
3. Azhari, E., Aliredjo, M.S., Dharmayanti, N. and Purnomo, A.H. (2023) Sterilization of ready-to-eat products: Skipjack tuna (Katsuwonus pelamis Linnaeus 1778) in retort pouch packaging ', Jurnal Pengolahan Hasil Perikanan Indonesia, 26(1), pp. 77-86. Available at: [DOI:10.17844/jphpi.v26i1.41863]
4. Biewendt, H.G. (1994) 'Sterilization values for ultrahigh heating of milk', Food / Nahrung, 38(3), pp. 233-252. Available at: [DOI:10.1002/food.19940380302] [PMID]
5. Bindu, J., Ravishankar, C.N. and Srinivasa Gopal, T.K. (2007) 'Shelf life evaluation of a ready-to-eat black clam (villorita cyprinoides) product in indigenous retort pouches', Journal of Food Engineering, 78(3), pp. 995-1000. Available at: [DOI:10.1016/j.jfoodeng.2005.12.040]
6. Bork, L., Haase, P.T., Rohn, S. and Kanzler, C. (2021) 'Formation of melanoidins - Aldol reactions of heterocyclic and short-chain Maillard intermediates', Food Chemistry, 380, p. 131852. Available at: [DOI:10.1016/j.foodchem.2021.131852] [PMID]
7. BPOM (2019) Protokol Validasi Kecukupan Panas Proses. Jakarta: Badan Pengawas Obat dan Makanan.
8. Djukic, S., Bocahut, A., Bikard, J. and Long, D.R. (2020) 'Mechanical properties of amorphous and semi-crystalline semi-aromatic polyamides', Heliyon, 6(4), p. e03857. Available at: Available at: [DOI:10.1016/j.heliyon.2020.e03857] [PMID] [PMCID]
9. Girish, P.S., Nath, L., Thomas, R., Rajkumar, V. and Alam, T. (2018) 'Development of shelf stable ready-to-eat pork curry using retort processing technology', Journal of Packaging Technology and Research, 2(1), pp. 61-66. Available at:
https://doi.org/10.1007/s41783-018-0026-5 [DOI:10.1007/S41783-018-0026-5]
10. Hariyadi, P. (2008) 'The food-canning industry in Indonesia: need for safety assurance regulation and quality optimisation', Food Manufacturing Efficiency, 2(1), pp. 45-48. Available at:
https://doi.org/10.1616/1750-2683.0027 [DOI:10.1616/1750-2683.00xx]
11. Hariyadi, P. (2015) 'Overpressure retort: untuk produk pangan dengan kemasan inovatif', Jurnal Food Review Indonesia, 10(4), pp. 34-38.
12. Koutchma, T., Song, Y., Setikaite, I., Juliano, P., Barbosa-Cánovas, G.V., Dunne, C.P. and Patazca, E. (2010) 'Packaging evaluation for high-pressure high-temperature sterilization of shelf-stable foods', Journal of Food Process Engineering, 33(6), pp. 1097-1114. Available at: [DOI:10.1111/j.1745-4530.2008.00328.x]
13. Kurniadi, M., Kusumaningrum, A., Nurhikmat, A. and Susanto (2019) Thermal process of fried rice in retort pouch packaging and its shelf life prediction', Indonesian Journal of Industrial Research, 11(1), pp. 9-21. [DOI:10.26578/jrti.v13i1.4177]
14. Kusnandar, F., Dafiq, H.H., Rahayu, W.P. and Irmawan, D. (2023) 'Heat treatment adequacy evaluation and redesign of commercial sterilization process for canned button mushrooms', Jurnal Mutu Pangan, 10(2), pp. Available at:
https://doi.org/10.29244/jmpi.2023.10.2.100 [DOI:100-107. 10.29244/jmpi.2023.10.2.100]
15. Leander, R.C., Hedrick, H.B., Brown, M.F. and White, J.A. (1980) 'Comparison of structural changes in bovine long and semitendinosus muscles during cooking', Journal of Food Science, 45(1), pp. 1-6. Available at: [DOI:10.1111/j.1365-2621.1980.tb03857.x]
16. Majumdar, R.K., Roy, D. and Saha, A. (2017) 'Textural and sensory characteristics of retort-processed freshwater prawn (Macrobrachium rosenbergii) in curry medium', International Journal of Food Properties, 20(11), pp. 2487-2498. Available at: [DOI:10.1080/10942912.2016.1242139]
17. Pamuji, M.W., Purnomo, E.H. and Sitanggang, A.B. (2021) 'Industrial practice for reducing defective sterile milk products produced using overpressure rotary retorts', International Journal of Food Studies, 10(1), pp. 221-232. [DOI:10.7455/ijfs/10.1.2021.a8]
18. Panowicz, R., Konarzewski, M., Durejko, T., Szala, M., Łazińska, M., Czerwińska, M. and Prasuła, P. (2021) 'Properties of polyethylene terephthalate (PET) after thermo-oxidative aging', Materials, 14(14), p. 3833. Available at: [DOI:10.3390/ma14143833] [PMID] [PMCID]
19. Praharasti, A.S., Kusumaningrum, A., Nurhikmat, A., Susanto, A., Suprapedi, Maulani, M.D. and Wiratama, W. (2020) 'Estimation of sterilization value using general method and ball formula for beef rendang in retort pouch', International Journal on Advanced Science, Engineering and Information Technology, 10(5), pp. 2118-2125. Available at: [DOI:10.18517/ijaseit.10.5.8149]
20. Prasetyo, H., Padaga, M.C. and Sawitri, M.E. (2013) 'Study on physico-chemical quality of beef in the market of Malang City ', Jurnal Ilmu dan Teknologi Hasil Ternak, 8(2), pp. 1-8.
21. Purnomo, H. (2012) Teknologi Pengolahan Dan Pengawetan Daging. Malang: Universitas Brawijaya Press.
22. Rajkumar, V., Dushyanthan, K. and Das, A.K. (2010) 'Retort pouch processing of Chettinad style goat meat curry a heritage meat product', Journal of Food Science and Technology, 47(4), pp. 372-379. Available at: Available at: [DOI:10.1007/s13197-010-0062-9] [PMID] [PMCID]
23. Rohmah, Mu'tamar, M.F.F. and Purwandari, U. (2018) 'Analisis sifat fisik daging sapi terdampak lama perendaman dan konsentrasi kenikir (Cosmos caudatus kunth)', Jurnal Teknologi Industri Pertanian, 12(1), pp. 51-54. [DOI:10.21107/agrointek.v12i1.2894]
24. Satriawan (2019) The effect of drying time on the quality and shelf life of instant rembigas satay. Undergraduate thesis. Universitas Mataram.
25. Sembiring, Y.E.N. (2023) Desain proses termal pada sterilisasi produk tongseng kambing dalam retort pouch di HNR Food. Undergraduate thesis. IPB University.
26. Shah, M.A., Bosco, S.J.D., Mir, S.A. and Sunooj, K.V. (2017) 'Evaluation of shelf life of retort pouch packaged Rogan josh, a traditional meat curry of Kashmir, India', Food Packaging and Shelf Life, 12, pp. 76-82. Available at: [DOI:10.1016/j.fpsl.2017.04.001]
27. Singh, R.P. and Heldman, D.R. (2009) Introduction to Food Engineering. 4th edition. Amsterdam: Academic Press.
28. Xavier, K.A.M., Ravishankar, C.N., Bindu, J. and Gopal, T.K.S. (2013) 'Textural and colour changes of mackerel (Rastrelliger kanagurta) thermal processed at different retort temperatures', Fishery Technology, 50, pp. 133-138.
29. Yuriandala, Y., Syamsiah, S. and Saptoadi, H. (2016) 'Pirolisis campuran sampah plastik polistirena dengan sampah plastik berlapisan aluminium foil (multilayer)', Jurnal Sains and Teknologi Lingkungan, 8(1), pp. 10-20. Available at: [DOI:10.20885/jstl.vol8.iss1.art2]
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
